SKWOTZKOFF 1PCS 3/32" End Mill Bits Carbide Square 4 Flute TiN 1/8" Shank

Key features

• 4 FLUTES, FINER FINISH - Four edges split the chip load, so these milling bits leave a smoother wall than a 2-flute cutter. On a cnc router or mill they hold size on long runs, and the square nose cuts clean. The helix keeps the wall straight.
• TIN COATING TAKES THE HEAT - The coating shields the cutting edge from heat and the HRA90 carbide body stays hard, so this coated end mill keeps its bite in aluminum and hardened alloy steel, and handles plunging on center cut.
• STRAIGHT SHANK, STANDARD FIT - The straight shank seats in standard collets and set-screw end mill holders, so these milling tools and cutters drop into the spindle you already run. No new holder needed: check overall length and dia first.
• WHAT YOU GET - These square-nose end mills share one geometry: straight shank, 4 flutes and a TiN coating. Build a carbide end mill set from one cutter, or order a single end mill cutter in your size. Each cnc end mill ships in its own holder.
• HARDER STEELS, LIGHTER CUTS - Run hardened and alloy steel at conservative speed, feed and depth of cut, and aluminum, brass and copper much faster. Keep the chips clear and take extra light passes so the flutes do not load up. Let it cut, not rub.

Free shipping included. 30-day hassle-free returns.