JIECHENG 6-1/8 Inch Hole Saw with Arbor for Recessed Lights, M42 Bi-Metal

Key features

• 6-1/8 Inch Cutout for Recessed Lights: Cuts a 6-1/8 inch / approximately 156mm diameter opening with about 1.24 inch / 32mm cutting depth. Ideal for many 6-inch recessed, canless, wafer and ceiling lights that specify a 6-1/8 inch cutout. Always verify the fixture manufacturer's required cutout size before drilling.
• M42 Bi-Metal Multi-Material Cutting: HSS M42 teeth provide a durable cutting edge for drywall, gypsum board, plasterboard, wood, plywood, plastic, aluminum sheet, thin iron sheet and thin stainless steel sheet. A practical choice for lighting installation, remodeling and other large-hole projects.
• Stable Arbor and Pilot Drill System: The included arbor mandrel and center pilot drill help position the 6-1/8 inch hole saw accurately and keep the large-diameter cutter centered as the cut begins. The spring assists with removing the cut plug after drilling.
• Complete Ready-to-Use Kit: Includes 1 x 6-1/8 inch M42 bi-metal hole saw, 1 x arbor mandrel with pilot drill bit and spring, 1 x extra pilot drill bit and 1 x wrench. The 3/8 inch / 9.5mm hex shank fits most drills with 3/8 inch or 1/2 inch chucks.
• For Lighting, Duct and Installation Openings: Suitable for recessed light cutouts, canless and wafer light installation, ceiling openings, duct and vent projects, and speaker openings when a 6-1/8 inch cutout is specified. Start at low speed and keep the drill steady. Not intended for tile, ceramic, porcelain, concrete, stone, granite, quartz, thick steel or thick stainless steel.

The 6-1/8 inch / 156mm bi-metal hole saw is designed for making large, clean openings in wood, drywall, plywood, plastic and thin metal sheets. It is especially useful for recessed light installation, ceiling light cutouts, can light openings, speaker holes, air duct openings and general home improvement projects. Made with HSS M42 bi-metal teeth, this hole saw provides sharp cutting performance and helps reduce binding when used properly. The included arbor mandrel with pilot drill bit helps guide the cut and improves drilling stability, which is important when using a large-diameter hole saw. Package includes: 1 x 6-1/8 inch bi-metal hole saw 1 x arbor mandrel with pilot drill bit and spring 1 x extra pilot drill bit 1 x wrench Recommended materials: Wood, plywood, plastic board, drywall, plasterboard, gypsum board, aluminum sheet, thin iron sheet and thin stainless steel sheet. Not recommended for: Tile, ceramic, porcelain, marble, granite, quartz, stone materials, thick steel plate or thick stainless steel plate. For best results, start drilling at a low speed, keep the drill steady, and increase speed gradually only when the hole saw is properly positioned. Always wear safety

Free shipping included. 30-day hassle-free returns.